Yes, the bridge is the most important component for all Maxhaust extensions. In conjunction with the Bridge app, it controls and monitors all connected Maxhaust products. The bridge is the heart of the system.

Yes. Most vehicles can also be controlled via the driving profiles, such as the "Drive Select" (Comfort, Auto, Dynamic) for Audi or the "Agility" profile for Mercedes. Additionally, buttons such as ESP or cruise control are also possible. The preferred variant can be set via the smartphone app.

Assembly is not difficult for a skilled person. presence of the The right tool is a prerequisite. Welding work is necessary when installing under the vehicle. These should always be from to be carried out by a specialist. However, our team is always available by phone for advice to the side.

Yes. The system can (depending on the vehicle) be switched on and off using the original vehicle buttons and the app.

The system can be easily upgraded. When installed indoors, the holes are sealed with a closed rubber grommet. On rare occasions, the carpet insert may need to be replaced. So far we haven't had any negative experiences with leasing returns.

If the DEEP SPEAKER is installed in the trunk, you can only see the pipe opening from below. If installed under the car, you can only see the speaker when you lie under the car. The HIGH SPEAKER, on the other hand, must always be installed on the vehicle underbody so that it is visible.

No. This only has disadvantages. On the one hand, the speaker could overheat and be damaged as a result, and on the other hand, the volume of the sound would be massively impaired. In other words, the system becomes quieter.

The "DEEP SPEAKER" actuator can either be placed in the spare wheel well or directly installed under the vehicle. In both cases, the montage sets enough free space ahead.

The "HIGH SPEAKER" is installed outside or under the vehicle. Mounting the HIGH SPEAKERS requires sufficient free space under the vehicle.

No. With a professional installation, there can be no malfunctions in the vehicle.

We do not offer an extra button or switch. The advantages are obvious. Who wants to lay extra cables and drill holes in the fittings when you can use the original vehicle buttons! If you still want a button, you can of course use a switch to interrupt the power supply to our modules and thus switch the system on and off.

No. It has nothing to do with the exhaust system. The sound spreads under the vehicle, so you can't tell if the sound is coming from the left or right.

No. It doesn't need to be coded. The system is ready for operation immediately after installation.

The Maxhaust Sound System can be installed in any vehicle, whether petrol, diesel or electric be installed, which has a CAN-BUS. These are usually vehicles built after 2000. You can use the configurator to find out whether your vehicle is available. -->TO THE CONFIGURATOR<-- If your vehicle is not listed, please contact us. -->CONTACT US<--